The COMPACT polycarbonate for both, the pool and spa enclosures are available in Clear (Transparent), Bronze Shaded Panels (Smoked) for Privacy or Embossed (Translucent) for complete Privacy. Additionally, for the pool enclosures, the Twin Wall Honeycomb polycarbonate is available in Clear and Smoked.

Polycarbonate panels are 3mm – 10mm thick (Approx 1/8″ – 1/2″ thick). They provide the perfect combination of strength, high impact resistance, good acoustical insulation, high clarity and light transmission. The polycarbonate is virtually unbreakable, flexible, lightweight, and weather resistant and protects against harmful UV radiation.

The widths are generally to 45 feet, and all lengths can be accommodated. However, this would be based on wind and snow load requirements where installed.

The enclosure is equipped with locking devices/pins for each door to safely close doors to guard against unwanted entry.

Yes, the polycarbonate panels protect your skin from harmful UV radiation.

Yes, our enclosures are designed and built for year-round use. The polycarbonate panels allow the sun’s rays in while providing good insulation properties. The enclosures frame is equipped with a vinyl sweep that seals in the warm air and reduces the draft. This creates a warm enclosed environment, minimizing heat loss.

Yes, condensation inside the twin-walled polycarbonate is normal and it is impossible to avoid it. This condensed water is disposed by drain channels.

The price depends on the model of chosen enclosure, the number of segments size, wind and snow load requirements and options. While we do offer Standard models and sizes, we also offer custom enclosures. Please contact us for a free no obligation quote.

Our enclosures are designed and built to withstand your local building code requirements for snow. You should prevent an accumulation of higher amounts of snow on the enclosure. The weight of wet snow is several times higher than fresh snow. For example one foot of new snow weights 5.2 lbs/sf while 3-5 inches of compacted snow weighs 5.2 lbs/sf and 1 inch of ice weights 5.2 lbs/sf. If removing snow is needed, it should be done symmetrically, preferably from both sides at once, so that the structure is not unevenly loaded.

Our enclosures are designed and built to withstand your local building code requirements for wind. To prevent the enclosure from being damaged in high winds, it is necessary to keep the enclosure closed and locked into the rails as the enclosure works off of deflection. End panels and segments must be closed and locked as well as any door or window. Do not slide any segment of the enclosure during high winds. No person should be inside the enclosure during high winds.